Tire Pressure Monitoring

LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS


LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS
LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS
LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS
LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS
LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS
LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS
LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS
LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS
LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS
LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS
LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS
LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS

LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS    LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS
Make sure to program the sensor by launch sensor programming tools for your specific vehicle make. Model and year before installation. LTR-01 is LAUNCH own designed and produced RF-Sensor that provides 98% vehicle coverage to offer the best TPMS solutions for any repair shops or tire shops.

It can combine both 315MHz and 433MHz frequencies in one sensor. Features with an international leading automotive grade chip, the pressure value of LTR-01 can be accurate to 0.1 BAR. The high Precision Air Valve can effectively prevent air leakage and ensures durability and stability.

With the outstanding and reliable OE level performance, LTR-01 can replace all originalreplace original tire pressure sensors, copy the original tire pressure sensor data and can be programmed indefinitely. 315 & 433MHz 2 in 1 Sensor? This tire pressure monitoring sensor (for TPMS) has been manufactured to combine both 315 MHz and 433 MHz.

Applications in one sensor to greatly simplify users' inventory management and lower the investment as well as sales loss. And it is built to perform like OE sensors in terms of signal, durability and functionality. Support 99% of Vehicles on the Road? Asian : ACURA, DAEWOO, HONDA, HYUNDAI, INFINITI, KIA, MAZDA, MITSUBISHI, NISSAN.

SUBARU, TOYOTA, ISUZU, DAIHATSU, etc. American : CHRYSLER, GM, US-FORD, FIAT (BRAZIL), GM (BRAZIL), DODGE, JEEP, BUICK.

European : ASTON MARTIN, AUDI, BENZ, BMW, FIAT, JAGUAR, LANDROVER, SAAB, SEAT. SKODA, SMART, VOLVO, OPEL, PEUGEOT, DACIA, CITROEN, MINI, PORSCHE, SPRINTER. VW, ALFA ROMEO, VAUXHALL, FORD, FERRARI, IVECO, MASERATI, BENTLEY, BUGATTI, etc.

Accurate to 0.1 Bar? Small, Stubborn, Reliable, IP67 Waterproof, Dustproof, Snow, Desert, Off-Road, FXTH87E. Compatible with over 95% OE sensors Compatible with OE sensors of 315MHz/433MHz Over-the-air wireless programming Battery life of 4 to 6 years Unlimited number of reprogramming for LAUNCH sensors.

Same as OEM Sensors Replace All Known OEM Sensors 99% of Vehicle Coverage Wireless & Unlimited Programming. Unlimited Programable, Clone the OE-Sensors, 3-Step Mounting Process. Perfectly Compatible with Launch CRT5011X, TS Gun, X431 V+, Pros Mini, PAD3, CR972 Tools Sensor Programming. Installation Process for Rubber Valve (Screw-In)? Loosening the tire: Remove the valve cap and core and deflate the tire. Use the bead loosener to unseat the tire bead. Dismounting the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to dismount the bead. Dismounting the sensor: Remove the screw nut from the valve stem, and then remove the sensor assembly from the rim. 1 Connect the sensor body and valve stem at a suitable angle (normally use the maximum angle of 30 degrees) and tighten the screw. 2 Remove the screw nut from the valve stem. 3 Slide the valve stem through the valve hole of the rim with the sensor on the inside of the rim. 4 Tighten the screw-nut with 4.0Nm with the help of the positioning pin. Mounting the tire: Place the tire on the rim, make sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim. The TPMS sensor assemblies are replacement or maintenance parts for vehicles that have a factory installed TPMS. Make sure to program the sensor by Launch sensor programming tools for your specific vehicle make, model and year before installation. Do not install programmed TPMS sensor in damaged wheels. In order to guarantee optimal function, the sensor may only be installed with original valves and accessories provided by Launch. Each time a tire is serviced or dismounted, or if the sensor is removed or replaced, it is mandatory to replace the rubber grommet, washer, nut and valve core with our parts to ensure proper sealing.

It is mandatory to replace the sensor if it is extremely damaged. Launch MX-Sensor arrive blank and must be programmed with an Autel TPMS service tool prior to installation or at 0 PSI/kPa. Do not race with the vehicle on which the Snap-in MX-Sensor is mounted, and always keep the drive speed under 180km/h for Metal Valve sensor, or 240km/h for Rubber Stem sensor.

All our products are 100% original and brand new with latest version. We really appreciate your understanding! OBD2 Automotive Diagnostic Scanner Tool.

For more than 20 years with a most professional team over 1000 people. We are the authorized dealer of. All our products are 100% genuine and brand new.

TOPDON, our self-owned brand, is rapidly developing and becoming stronger. TO MAKE THINGS RIGHT before you leave feedback or open any case. We are 100% sure that we can solve any issues regarding. GMT8 (9:00-18:00) from Monday to Friday. Launch CRT5011X, TS Gun, X431 V+, Pros Mini, PAD3.

Launch TPMS Tyre Pressure Sensor. Compatible with OE sensors of 315MHz/433MHz. For CHRYSLER GM US-FORD FIAT GM.

Front, Left, Rear, Upper, Lower. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Wheels, Tyres & Parts\Tyre Pressure Monitoring Sensors". The seller is "fixtheworld" and is located in this country: GB.

This item can be shipped to United Kingdom.
  1. Operating Frequency: 315 MHz~433MHz
  2. OBD Interface: OBDII
  3. Manufacturer Part Number: Launch CRT5011X, TS Gun, X431 V+, Pros Mini, PAD3,
  4. Vehicle Type: Passenger Vehicle
  5. Brand: LAUNCH
  6. Warranty: 2 Year
  7. Model: LTR-01
  8. Battery: 3.0 V
  9. Battery Life: 4-6 Years Maintenance-Free Battery
  10. Operating Humidity: ≤90%
  11. Max. Pressure range: 800 kPa
  12. G Sensor Reading Accuracy: ±15%
  13. Supported System: TPMS
  14. Compatible with 1: Launch CRT5011X, TS Gun, X431 V+, Pros Mini, PAD3,
  15. Type: Launch TPMS Tyre Pressure Sensor
  16. Features: Compatible with OE sensors of 315MHz/433MHz
  17. Car Coverage: For CHRYSLER GM US-FORD FIAT GM
  18. Number of Sensors: Accroding to your need
  19. Unit Quantity: 1
  20. Sensor Type: Tire Pressure Monitoring Sensor
  21. Placement on Vehicle: Front, Left, Rear, Upper, Lower
  22. Country/Region of Manufacture: China
  23. Classic Car Part: Yes
  24. Material: Metal
  25. Terminal Type: Bullet
  26. Performance Part: Yes
  27. Items Included: Mounting Hardware
  28. Mounting Style: Screw-In, Bolt-On
  29. Manufacturer Warranty: 6 Months
  30. Universal Fitment: Yes
  31. Programming Required: Yes

LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS    LAUNCH LTR-01 RF Sensor 315MHz & 433MHz Tire Pressure Monitor Sensor Metal TPMS