4Autel MX-Sensor 315MHz 433MHz Universal Tire Pressure TPMS Sensor Programmable

4Autel MX-Sensor 315MHz 433MHz TPMS Universal Programmable Tire Pressure Sensor. Only 1 Sensor(315 + 433MHz) to service nearly every TPMS equipped vehicle to lower repair cost and to have higher install efficiency with no relearning It is 100% clone-able with the original sensor ID and put in the same position.

Featuringthe latest and most comprehensive coverage of 98% OE sensors on the market, and up to 90% of North American, European and Asian vehicles, it nearly fits all types of wheels on the road. The unique PRESSrelease valve design makes the manual sensor replacement much easier. Also it allows easy stem removal from sensor head, and easily programmed wirelessly even when they have already been mounted to the wheel.

Autelhigh-quality MX-Sensor is tested and certified to meet SAE industry standard J1205/J1206 testing. Being able to withstand severe weather conditions and prevent air leakage, this sensor ensures superior stability and performance. Autel guarantees that the sensor is free from material and manufacturing defects for a period of 24 months or for 24,000 miles. Noted: AutelMX-Sensor is available to be programmed only with an Autel TPMS diagnostic tool.

Been manufactured to combine both 315 MHz and 433 MHz applications in one sensor to greatly simplify users' inventory management and lower the investment as well as sales loss. In terms of signal, durability and. An easy to use and cost effective necessity for any shop performing TPMS repairs, the Autel 1-SKU sensor has the long ability to cover over 98% of all OE sensors on the market, to support up 90% of North American, European and Asian brands. On the shop level, needing only 1-Sensor to service nearly every TPMS equipped vehicle means lower repair cost and higher install efficiency. With both rubber and metal accessory valve stems available, our accessory valve kits minimize service time and provide a quick assembly for installation.

The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Installing TPMS sensors has never been so easy. The extraordinary sensor signal strength allows Autel 1-Sensor to be easily programmed wirelessly even when the sensors have already been mounted to the wheel.

Autel MX-Sensor is 100% clone-able with an Autel latest wireless TPMS programming tool. No relearn is required when the MX-Sensor is cloned with the original sensor ID and put in the same position.

With the highest quality materials and advanced TPMS technology, Autel 1-Sensor provides superior battery life and reliability, to match OE sensor battery performance. The 1-Sensor body weighs only 12g, making it significantly lighter than most sensors in the market, which ensures better sensor stability and performance.

Autel guarantees MX-Sensor are free from manufacturing defects for a period of 24 months or 24,000 miles, whichever option comes first. Each Autel MX-Sensor has a series number for assuring quality control. The series number is imprinted on the sensor or can be read with Autel TPMS tools. With the series number, Autel can track the sensor quality from our factory manufacturing to ensure only the highest quality parts are installed. Loosening the tire: Remove the valve cap and core and deflate the tire.

Use the bead loosener to unseat the tire bead. Dismounting the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation Insert thetire tool and lift the tire bead onto the mounting head to dismount the bead. Dismounting the sensor: Depress the Pressbutton on the sensor body.

Carefully pull the sensor body straight back off the valve. Cut the rubber bulb and attach a standard tire valve extractor to the valve. Remove the valve from the rim by pulling through the rim. Connect the sensor body and valve stem at a suitable angle (normallyuse the maximum angle of 30 degrees) and tighten the screw.

Apply tire soap or lube solution to the rubber valve stem. Line the sensor up with the rim hole and attach a standard tire valve extractor to the end of the valve. Pull the valve stemstraight through the valve hole. Note the rubber bulb of the valve resting against the rim. Mounting the tire: Place the tire on the rim, make sure that the valve faces the separationhead at an angle of 180 degrees. Mount the tire over the rim.

The TPMSsensor assemblies are replacement or maintenance parts for vehicles that have a factory installed TPMS. Make sure to programthe sensor by Autel sensor programming tools for your specific vehicle make, model and year before installation.

Do not install programmed TPMS sensor in damaged wheels. In order to guaranteeoptimal function, the sensor may only be installed with original valves and accessories provided by Autel. Each time a tire is serviced or dismounted, or ifthe sensor is removed or replaced, it is mandatory to replace the rubber grommet, washer, nut and valve core with our parts to ensure proper sealing. It is mandatory to replace the sensor if it is extremely damaged. Autel MX-Sensor arrive blank and must be programmed with an Autel TPMS service tool prior to installation or at 0 PSI/kPa.

Do not race with the vehicle on which the Snap-in MX-Sensor is mounted, and always keep the drive speed under 180km/h for Metal Valvesensor, or 240km/h for Rubber Stem. Autel guarantees that the sensor is free from material and manufacturing defects for a period of 2 years or within 24,000 running miles, whichever comes first.

100% ID clone-able and no relearn required. Tested and certified to meet SAE standards. 42.424.116.0 mm. Weight of Sensor without Valve.

All our products are 100% original and brand new with latest version. We really appreciate your understanding!

OBD2 Automotive Diagnostic Scanner Tool. For more than 20 years with a most professional team over 1000 people. We are the authorized dealer of. All our products are 100% genuine and brand new.

TOPDON, our self-owned brand, is rapidly developing and becoming stronger. TO MAKE THINGS RIGHT before you leave feedback or open any case.

We are 100% sure that we can solve any issues regarding. GMT8 (9:00-18:00) from Monday to Friday.

This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Wheels, Tyres & Parts\Tyre Pressure Monitoring Sensors". The seller is "obdtoolsprostore" and is located in this country: GB. This item can be shipped to United Kingdom.

Country/Region of Manufacture: China
Number of Sensors: According to your order
Supported System: TPMS
Operating Frequency: 315 MHz~433MHz
Type: AUTEL MX-Sensor TPMS Tyre Pressure Sensor
Car Coverage: For Ford Fiesta Vauxhall BMW Mercedes Audi etc.
Compatible with: AUTEL TPMS TS401 TS501 TS601 TPMS Pad
Operating Humidity: ≤90%
Max. Pressure range: 800 kPa
Manufacturer Part Number: Autel 433 315 2 in 1 sensor ts401 ts501 ts601 MX-sensor
G Sensor Reading Accuracy: ±15%
Weight of Sensor without Valve: 11 g
Unit Type: Unit
Brand: AUTEL
Features: Easy Installation
Placement on Vehicle: Front, Left, Lower, Rear
Sensor Type: Tire Pressure Monitoring Sensor
Terminal Type: Bullet