You can use this smart reset tool to achieve sensor replacement, tire shifting, sensor check, TPMS diagnostics, sensor programming, sensor relearning, etc. Small TPMS Tool with Big Power. Main Highlights of LAUNCH TPMS Diagnostic Tool. LAUNCH scanner provides all-around TPMS diagnostics including reading code, clearing code, receiving ECU information to locate vehicle problems. This TPMS programming tool can read tire pressure data like tire pressure, tire temperature, battery status, etc.
Multiple modes to program sensor: Auto Create, Manual Input, Copy ID by Activation, and Copy ID by OBDII. Various ways to match sensor ID: Stationary Relearn, OBDII Relearn, Auto Relearn.
TPMS relearn tool supports unlimited programming for LAUNCH sensors, which is comparable with OE diagnostic tool. TPMS reset tool enables you to activate all the OE and common 315MHz/433MHz sensors. LAUNCH TPMS scan tool covers 98% of vehicles with TPMS modules.
Sensors can be programmed at the same time, efficient and user-friendly. Built-in rechargeable lithium battery keeps sustainable output and long-lasting work time. USB connection frees you from the entangled cable and ensures accurate data transmission. LAUNCH CRT 5011X, a New Generation of TPMS Relearn Tool.4 Ways to Program the LAUNCH Sensors. Programming allows users to program the sensor data to the new LAUNCH sensors and replace faulty sensors with low battery life or one that is not functioning. The LAUNCH CRT 5011X diagnostic tool can program 8 sensors simultaneously. Note: This TPMS reset tool only programs the LAUNCH sensors. If the old sensors are not completely broken, you can use the TPMS relearn tool to appropriately trigger them and write in the retrieved original sensor data to the LAUNCH-sensor. If the original sensor is completely bad or can't be activated, you can obtain the original ID from the cover of the old sensors, manually input the sensor ID, and write into the new LAUNCH sensors. If the old sensor is completely broken or the original sensor ID can not be obtained, you can apply the car TPMS monitoring tool to create random IDs according to the test vehicle information.
If neither of the above methods, you can connect the OBD cable to receive the old sensor ID from TPMS ECU and copy it to LAUNCH sensors. 3 Modes to Relearn the Sensors. Relearn operation applies only to some occasions when the newly programmed sensor IDs are different from the original sensor IDs stored in the vehicle's ECU.The LAUNCH CRT 5011X car scanner matches OE and common sensors with on-board TPMS modules and establishes mutual communication. Require the vehicle to be placed in the "Learn Mode", follow the screen instruction to activate sensors, and perform stationary relearn. Allow the CRT 5011X to directly write TPMS sensor IDs to the TPMS module via the OBD connector. You can complete relearning by driving and refer to the on-screen Relearn Procedure for the exact details of the process. LAUNCH CRT 5011X Scan Tool = OBD2 Scanner + TPMS Tool. Full OBD Functions Perform Complete and Fast Diagnose. Show the detailed description of DTCs(current, pending, and permanent codes). Erase emission-related DTCs after repairing and turn off the check engine light.
Show the information of continuous data stream in a live graphic display. Request freeze frame data and check vehicle running status. Check the readiness of the monitoring components and systems. Retrieve and view O2 sensor monitor test results. Retrieve and display the results of emission-related powertrain components and systems.Initiate a leak test for the vehicle evaporator system. Certain vehicle components can be actuated by commands sent from the scanner to test their operability. Catch the vehicle information including VIN, CVN, and CIN. How to Update the LAUNCH Scan Tool? Step 1: Go to website (as user manual guided) to download the.
To your PC based on Windows XP, 7, 8, or Windows 10. Step 2: Register the LAUNCH TPMS scanner following the on-screen instruction on the update tool. Step 3: Copy the update package into the memory card, reinsert the memory card into the tool and start the update. How to Get the Serial Number and Register Code? Connect the LAUNCH 5011X TPMS relearn tool to your PC via USB cable.
Entered the main menu screen, choose. Note down the LAUNCH TPMS scan tool. Serial Number and Register Code. How to Copy the Update Package into the Memory Card?
Install the memory card to the card adaptor and connect to the PC. To copy the update package into the memory card. LAUNCH CRT 5011X Technical Specifications.9 18V via OBD diagnostic port / 5V via USB cable. Supported (This TPMS reset tool only programs the LAUNCH sensors). 3 way to relearn TPMS seneors. All our products are 100% original and brand new with latest version. We really appreciate your understanding!
OBD2 Automotive Diagnostic Scanner Tool. For more than 20 years with a most professional team over 1000 people.We are the authorized dealer of. All our products are 100% genuine and brand new. TOPDON, our self-owned brand, is rapidly developing and becoming stronger. TO MAKE THINGS RIGHT before you leave feedback or open any case. We are 100% sure that we can solve any issues regarding.
GMT8 (9:00-18:00) from Monday to Friday. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Wheels, Tyres & Parts\Tyre Pressure Monitoring Sensors".The seller is "reparaturautoteile" and is located in this country: GB. This item can be shipped to all countries in Europe.