Autel TPMS MX-Sensor 2in1 315MHz & 433MHz Auto Tire Pressure Sensor Pr0grammable

  

2024 Newest 4in1 Sensor: 315MHz & 433MHz. Q: What is difference between MX-sensor and other brand sensor?

A: Autel MX-sensor adopts 88E chips, which is an upgrade version of other sensors with old 87e chips, more stable and faster than old 87e chips sensor in the market. According to the tire pressure and tire temperature data collected by the sensor, real-time monitoring of tire running. MX-sensors can be pr0grammed by Autel TPMS scan tool. Maximum sensor signal strength to pr0gram up to 16 sensors wirelessly including sensors already mounted on the wheel.

100% ID Clone Accurately/No relearned needed. No relearn is required when the MX-Sensor is cloned with the original sensor ID and put in the same position. Sensors can be fast relearned by TPMS scan tool, No restrictions on brands. Dual 4in1 Frequency 315MHz & 433 MHz. 4in1 sensor can replace 99% sensors in the market, 1-SKU can reduce inventory investment and storage pressure.

Supports 98% vehicles in the road. Tested & certified to meet SAE standards.

Autel ensures MX-Sensor are free from manufacturing defects for a period of 24 months or 24,000 miles, whichever option comes first. Battery Life: 4-6 years; Operating Frequency: 315&433 MHz; Pressure Monitoring Range: 0 to 800 kPa; Operating Humidity:? 90%; Temperature Reading Range: -40°C to +125°C; Transmission Power: 5-8 dBm; Battery: 3.0 V. Work with All Autel TPMS Scanner.

Autel MX-sensor can work with Autel TPMS Scan Tool and other scanners. Work with Autel TPMS Scan Tool. Autel MX-sensor can work with MS906 Pro-TS, MK906 Pro-TS, MS906TS, MP808TS, MK808TS, TS608, TS601, TS508, TS501, ITS600, etc. To perform pr0gram, activate, relearn etc. MX-sensor only can be pr0grammed by Autel Scanner, other brands scan tool can't pr0gram Autel MX-sensor.

Work with Other Scan Tool. Autel MX-sensor can also work with other brands to perform sensor relearn and activeate, but please be noted can't be pr0grammed by other brands scanner. Step 1: Loosening the tire. Remove the valve cap and core and de?? Use the bead loosener to unseat the tire bead.

Step 2: Dismounting the tire. Clamp the tire onto the tire changer, and adjust the valve at 1 o'cl0ck relative to the tire separation head.

Insert the tire tool and lift the tire bead onto the mounting head to dismount the bead. Step 3: Dismounting the sensor. Depress the Press button on the sensor body, carefully pull the sensor body straight back off the valve. Cut the rubber bulb and attach a standard TTV tool to the valve. Remove the valve from the rim by pulling through the rim.

Step 4: Mounting sensor and valve. Apply tire soap or lube solution to the rubber valve stem. Line the sensor up with rim hole and attach a standard TTV pull in tool to the end of the valve. Pull the valve stem straight through the valve hole. Note the rubber bulb of the valve resting against the rim, then assemble the cap back on the stem. Step 5: Mounting the tire. Place the tire on the rim, make sure that the valve faces the separation head at an angle of 180°. Mount the tire over the rim.

98% Vehicle Coverage & 4in1 MX-sensor. Autel sensors support 98% of North American, European and Asian vehicles, cover almost all OE sensors on the market, and provide vehicle coverage for the latest models. Only 1SKU 2-in-1 sensor is required to service almost every TPMS-equipped vehicle to reduce maintenance costs and increase installation efficiency without relearning. The MX-Sensor can be cloned with 100% of the original sensor ID and placed in the same location.

Benefit of Regular Sensor Replacment. Tires are a very important part of the safe driving of a car, and tire pressure is the life of the tire, so keeping the correct tire pressure at all times will greatly benefit the personal safety of the car owner and the maintenance of the car. As a small accessory that needs to be replaced regularly, the sensor plays a vital role in the TPMS system. Autel MX-sensor can sense the data in the tire and wireless transmit the collected data to the car dashboard.

The driver can clearly see the pressure value and temperature in the tire through the new product on the dashboard, so as to monitor the safety of the TPMS system. Regular replace sensor offers greatly benefit for you. Keep Tire Balance; Prevent Flat Tire; Extend Tire Life; Save Oil; Reduce Tire Wear; Prevent Tire Pressure Instability. Wireless pr0gramming & 100% Clone-able.

Autel MX-Sensor can be wireless pr0grammed by all Autel TPMS tools. Note: Autel MX-Senor only can be pr0grammed by Autel TPMS Scan Tool. Autel MX-Sensors have both rubber valve and metal valve available.

Thses 4pcs sensors are rubber valve. The unique patented press release valve design allows rubber and metal sensor valves to be freely interchanged by hand, without requiring a tool for sensor head fitting. Installing TPMS sensors has never been so easy.

4PCS Sensors in the Package. These 4 pcs sensors are rubber valve.

Both of them are 2in1 sensors: 315MHz&433MHz frequency.