Unlimited Programable, Clone the OE-Sensors, 3-Step Mounting Process. Perfectly Compatible with Launch CRT5011X, TS Gun, X431 V+, Pros Mini, PAD3, CR972 Tools Sensor Programming. Installation Process for Rubber Valve (Screw-In)? Loosening the tire: Remove the valve cap and core and deflate the tire.
Use the bead loosener to unseat the tire bead. Dismounting the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to dismount the bead. Dismounting the sensor: Remove the screw nut from the valve stem, and then remove the sensor assembly from the rim. 1 Connect the sensor body and valve stem at a suitable angle (normally use the maximum angle of 30 degrees) and tighten the screw.2 Remove the screw nut from the valve stem. 3 Slide the valve stem through the valve hole of the rim with the sensor on the inside of the rim.
4 Tighten the screw-nut with 4.0Nm with the help of the positioning pin. Mounting the tire: Place the tire on the rim, make sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.The TPMS sensor assemblies are replacement or maintenance parts for vehicles that have a factory installed TPMS. Make sure to program the sensor by Launch sensor programming tools for your specific vehicle make, model and year before installation.
Do not install programmed TPMS sensor in damaged wheels. In order to guarantee optimal function, the sensor may only be installed with original valves and accessories provided by Launch. Each time a tire is serviced or dismounted, or if the sensor is removed or replaced, it is mandatory to replace the rubber grommet, washer, nut and valve core with our parts to ensure proper sealing. It is mandatory to replace the sensor if it is extremely damaged.Do not race with the vehicle on which the Snap-in MX-Sensor is mounted, and always keep the drive speed under 180km/h for Metal Valve sensor, or 240km/h for Rubber Stem sensor. All our products are 100% original and brand new with latest version.
We really appreciate your understanding! OBD2 Automotive Diagnostic Scanner Tool. For more than 20 years with a most professional team over 1000 people.
We are the authorized dealer of. All our products are 100% genuine and brand new. TOPDON, our self-owned brand, is rapidly developing and becoming stronger. TO MAKE THINGS RIGHT before you leave feedback or open any case. We are 100% sure that we can solve any issues regarding.
GMT8 (9:00-18:00) from Monday to Friday. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Wheels, Tyres & Parts\Tyre Pressure Monitoring Sensors". The seller is "alwaysfoin" and is located in this country: GB. This item can be shipped to United Kingdom.