XTOOL TP150 can trigger almost all 315/433MHz sensors in market like programmed OE or aftermarket sensors, provides you the instructions after selecting the correct make, model and year. Allow you to retrieve the info accurately and quickly: sensor ID, pressure, temperature, battery, frequency while activating. Note: Please check compatibility with VIN and sensor number. Sensors needed to be programmed first. XTOOL TP150 offers 4 ways to relearn 99% TPMS sensors: OBD Relearn, Stationary Relearn, Manual Relearn, Copy Relearn, provides online relearning procedure for most American, Asian and European vehicles equipped with TPMS.
Note: Some vehicles can automatically relearn after driving 20 minutes, please check from vehicle manual. Complete TPMS System Diagnostics & Turn off TPMS Light? XTOOL TP150 tpms sensor tool & tpms sensor reader will read real-time sensor data, diagnose TPMS system for comprehensive TPMS health check in minutes, and read/clear TPMS DTCs to quickly locate the problems, deflation in the tires; Scan TPMS sensor ID, check sensor position, frequency, battery life to determine when it should be replaced and ensure the tire health, helps to turn off blinking TPMS light; Works as your TPMS scanner/tps doctor. Broad Vehicle Coverage with 13 Languages supported?XTOOL TP150 TPSM tire sensor Tool covers for American cars including for GMC/for Buick/for Chevy/for Cadillac/for Buick/for Ford/for Lincoln/for Dodge/for Jeep/for Chrysler, etc; European cars including for Bentley/for VW/for Skoda/for Porsche/for Opel/for Vauxhall/for Fiat/for Peugeot/for Citroen/for Volvo/for BMW/for Mini/for Land Rover/for Renault, etc; Asian cars including for Mazda/for Toyota/for Lexus/for Nissan/for Acura/for Subaru/for Honda/for Mitsubishi/for Infinity, etc. NOTE: ONLY works for 12V OBD2 vehicles, please check compatibility from "Supports-Function Lists-TPMS"on xtooltech webs! For GMC/for Opel/for Cadillac, etc.
Sensors should be original OEM sensors which well programmed or choose XTOOL TS100 Sensors. 4 Ways to Program XTOOL TS100 Sensors When Replacing OE Sensors Is NeededOther Sensors are not supported!Automatically create a new unique ID(s) into TS100 sensors. After programming the TS100, you need to perform tpms relearn to match the new sensor ID to vehicle's ECU. If you don't know the original sensor ID or your original sensor was bad, you could choose this method. Input the ID manually into the new installed TS100 sensor.
You can find the ID on the original sensor. If you know the original sensor ID(the original sensor cannot be activated) and the tire/sensor position has not been changed, you could choose this method.
Trigger the original sensor, get the ID and and copy the ID to the new sensor. If your original sensor works and can be activated, and the tire/sensor position has not been changed, you can choose this method.
Diagnose the vehicle TPMS and get the ID, copy it to the new sensor. If your original sensor is missing and the ID can be read after diagnosis on the car, and the tire/sensor position has not been changed, you can choose this method. TPMS programming only work with XTOOL TS100 sensors. TS100 sensors are not included in the tool kit!If your sensors are OE sensors or other brands sensors, TP150 cannot support, please choose XTOOL TS100 to work together! If your sensors are pre-programmed, then you do not need this step, you should start it from TPMS activation/Trigger Sensors. Relearn is needed for Method 1; relearn is no need for Method 2,3,4. As for method 2,3,4, please note that the damaged OE sensors should not be placed on the vehicle while programming, as they can cause data interference. XTOOL TP150 - Your Complete TPMS Solution for Safe & Efficient Driving.
When triggering sensors, we suggest to put the sensor that. Needs to be triggered 10 cm (4 inch) close to the device. And to avoid interference, please put other sensors 2 meters (7 feet) away from the device if possible. As the IDs are likely to be different with the IDs stored inside the vehicle. Is needed after the sensor is installed.Note: Some vehicle will need extra steps on the procedures introduced below. Please refer to the guide shown on the device when actual processing. DEVICE WON'T POWER ON.
If the device fails to power on. Check whether the battery is depleted. If certain functions are not working, we recommend. If the device does stop working, we advise performing a simple reset or re-installing the update.