New LAUNCH Creader TPMS 5011 V2 Activation Tool Tire Pressure Monitoring Sensor

  

2025 New Upgrade Comprehensive TPMS Diagnosis Tool & FULL OBD2 Function. LAUNCH X431 Creader 5011 V2 TPMS Tool is an all-around professional tire pressure checking device, which is the upgraded version of LAUNCH CRT5011E/CRT5011X. LAUNCH CREADER 5011 V2 TPMS diagnostic tool can fully diagnose the TPMS problem, activate TPMS sensors, TPMS re -learning, and sensor OE number query.

LAUNCH X431 Creader 5011 V2 TPMS Tool is equipped with Android 8.1 system, 5 inches Display, 7201280 pixels, 6000mAh large -capacity batteries, 2+32GB memory, which is easy to operate and can be connected to WIFI online diagnostics, free software upgrade. LAUNCH X431 Creader 5011 V2 TPMS Tool Help you complete the replacement of tire pressure sensors, tire replacement, vehicle factory online assembly and inspection, and independent detection of the sensor itself is correct. Includes code reading/clearing, I/M readiness, data stream, freeze frame, on-board monitor test, E. VAP system test, retrieve vehicle information and so on. Includes Brake Reset, Oil Reset,, Inject Reset, Battery Matching, ABS Bleeding, Throttle Reset, D-P-F Reset, Sunroof Reset, Seats Calibration, Windows Calibration, EVAP Monitor Test, etc.

Activate 99% & 315MHz/ 433MHz Sensor. LAUNCH Creader TPMS 5011 V2 can easily activate most of OEM 315/433MHz TPMS sensors on the market, Reading/copy/writing sensor ID value, support Unlimited Repeated Programming and diagnose the tire pressure system. Helps to perform automatic, static or OBDII relearning; The built-in TPMS relearning guide varies with the car's make, model, and year. Help you query the model menu according to the sensor part number, and the model menu can be located more accurately.

Read & Write Sensor ID. Supports automatic creation, manual creation, OBD ID copying, active ID copying, and batch creation for multiple sensors (up to 8 at once). Provides service personnel with greater flexibility and control to diagnose, repair and replace tire pressure sensors more efficiently and accurately.

LAUNCH X431 Creader TPMS 5011 V2 TPMS tool Supports 99% of vehicle models, but is not fully compatible with all car models. Please inquire in advance before purchasing. Such as: fit for Abarth, fit for Land Rover, fit for Acura, fit for Lexus, fit for Audi, fit for Lincoln, fit for BMW, fit for Maserati, fit for Maybach, fit for Mercedes, fit for Chery, fit for Cadillac, fit for Cadillac, fit for Chrysler, fit for Mercury, fit for Chevrolet, fit for Nissan, fit for Daewoo, fit for Peugeot, fit for Dodge, fit for Porsche, fit for Renault, fit for Fiat, fit for Ford, fit for Rolls Royce, fit for Skoda, fit for Haval, fit for Honda, fit for Hyundai, fit for Suzuki, fit for Jaguar, fit for Volkswagen, fit for Jeep, fit for KIA, etc.

ACTIVATE 99% Vehicles TPMS SENSORS. LAUNCH Creader TPMS 5011 V2 can activate all 315/433MHz tire pressure sensors.

Use LAUNCH Creader TPMS 5011 V2 to touch the tire pressure sensor on the tire. And collected tire pressure information, such as sensor ID, tire pressure, tire frequency, tire temperature and battery condition. Visual interface, Allow users to understand easily, quickly understand your tire status.

LAUNCH Creader TPMS 5011 V2 can help you to diagnose the TPMS system, read and clear the TPMS dtc, view the detailed description of the dtc, and check the status of all TPMS sensors. LAUNCH Creader TPMS 5011 V2 programs sensor data to LAUNCH sensors and replaces sensors that have low batteries or are not functioning properly. It can program up to 8 LAUNCH sensors simultaneously. LAUNCH Creader TPMS 5011 V2 can work with LAUNCH LTR-01/03 Sensor. To Program LAUNCH LTR-01/03 SENSOR.

Can manually enter the original ID. The system automatically generates ID.

Opy the old sensor ID to the LAUNCH LTR-01/03 SENSOR if the old sensor can still be activated. Activate 99% & 315MHz/ 433MHz Sensors.

LAUNCH Creader TPMS 5011 V2 can easily activate most of OEM 315/433MHz TPMS sensors on the market, Reading/copy/writing sensor ID value, Allow you to check and view the detailed TPMS sensor relearning program. The relearning operation is only applicable when the newly programmed sensor ID is different from the original sensor ID stored in the vehicle ECU. Relearn is used to write the newly programmed sensor ID into the vehicle's ECU for sensor recognition. You can check the OE number of the original sensor.

TPMS 5011 V2 have three relearn methods:OBD Relearn, Automatic Relearn, Stationary Relearn. Write TPMS sensor id to TPMS module through OBD connector. Placed in the "Learn Mode".

LAUNCH X431 Creader TPMS 5011 V2 is equipped with 12 OBDII functions. This TPMS tool performs OBDII-assisted relearn, communicates with the vehicle via the OBDI cable, triggers the wheel-mounted sensors, writes the sensor IDs directly to the vehicle's ECU for sensor recognition, and completes the sensor duplication in a snap.

After completing the oil change, reset the oil change telltale light in order to restart the vehicle's mileage calculation. After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.

Evaluates battery charge status, recalibrates the vehicle's electrical system to recognize a new or replacement battery and optimize its performance. Learn to correct the angle and solve the problem of the steering angle of the steering wheel. When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity. Ensure smooth throttle response after maintenance or component replacement. F filter through continuous combustion oxidation mode to stabilize the filter performance. When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle's ECU, reset tire pressure and turn off the tire pressure MIL. Write new injector codes into the car system to get the correct cylinder injection amount. Resetting the sunroof control unit can improve overall v-ehicle functionality. Sets the initial position and functions of the seats after adjustments or replacements.

Adjusts the position and function of windows to ensure proper operation and alignment. LAUNCH X431 Creader TPMS 5011 V2 support full OBDII functions, such as code reading/clearing, I/M readiness, data stream, freeze frame, on-board monitor test, E.

DTC library:Provide more than 10000+ vehicle service and repair data, LAUNCH Facebook, LAUNCH Official Website, I/M Messaging, PIN Detect, TPMS Database, Training video, LAUNCH Academy, Handbook, Repair Case and Operation Skill, Dtc Help, How-To Videos etc. LAUNCH X431 Creader TPMS 5011 V2 support Online Feedback, help vehicle owners solve vehicle problems in a timely manner, improve the efficiency of repair and diagnosis. Report Sharing & Printing:Support diagnostic report generation and sharing, which is conducive to historical diagnostic query and after-sales service maintenance.

LAUNCH X431 Creader TPMS 5011 V2 support 11 languages, such as Germany, Britain, West, France, South Korea, Italy, Japan, Traditional Chinese, Portuguese, Russia, Arabic. WHAT'S IN THE BOX?

1 x Creader TPMS 5011 V2. 1 x Diagnostic Main Cable. 1 x Type-C Charging Cable. 1 x Quick Start Guide.