8Autel TPMS MX-Sensor 315&433MHz Programmable Tire Pressure Sensor Metal+Rubber

  

8Autel TPMS MX-Sensor 315&433MHz Programmable Tire Pressure Sensor Metal+Rubber. Autel TPMS Sensor, MX-Sensor 2 in 1 (315MHz + 433MHz) for 99% of Cars, Wireless Programming 100% Cloneable, Same as OE Sensors, 6-Year Battery Life (Press-in Rubber Valve, 4PCS).

The Autel TPS218 TPMS sensors combine dual frequency (315MHz+433MHz) in. With 100% original sensor ID cloning, the MX-Sensors can be replaced directly in the same position without relearning. Pairing with the Autel MaxiTPMS tools (TS601), all the Autel MX-Sensors can be activated, programmed, and relearned well so that you can highly effectively replace the old one. [Upgraded Press-in Sensors, Easy to Install & Replace]. These universal Autel sensors come with 2 types of interchangeable valves (rubber/metal), perform the same functionality as OE sensors, and even replace 98% of OE sensors with a 1-valve type.

Press-in designed rubber/metal MX-Sensors can be quickly replaced without difficulty, to greatly minimize installation time and accurately match with the vehicle tires. Why MX-Sensor is essential for all TPMS repair shops? 1 Same functionality as the OEM sensors but cutting your 1/2 cost; 2 Wider coverage for 99% of American/Asian/European vehicles increases more repair orders and profits; 3 Reducing inventory investment and storage pressure, technicians don't need to prepare numerous sensors for different models. 4 Accurately reading sensor info. Sensor ID, voltage, tire pressure, temperature, battery, etc.

[Autel Programmable MX-Sensors, Alternative for OE Sensors]. Powerful 315/433MHz frequency achieves fast wireless programming to MX-Sensor TPS218. Note: ONLY Autel Sensor can be programmed. Equipped with an automotive-level battery for longer life (5+ years) and a replaceable aluminum valve stem, the Autel sensors are resistant to cold & heat and corrosion and compatible with SAE J1205/J1206/J2657 test standard.

For rare situations, we take no charge for sensors that hold manufacturing defects for 24 months or 24,000 miles. When Do You Need to Replace A New TPMS Sensor?

If you notice that your tires have low air pressure and there was no warning from the system, it is likely TPMS sensor failure. Other noticeable sides are sensor physic break, tire replacement, weak sensor battery, etc. In the USA, up to 80% of accidents are caused by tire pressure every year. Too high or insufficient tire pressure can be dangerous to driving conditions. Whether you choose the OE sensor or a universal sensor, timely replacing newly effective sensors is a must for safe driving.

Featuring more effective cost & wider application, Autel MX-Sensor is the no. 1 choice for all users. 99% of Vehicle Coverage: Function as OEM sensors, Autel MX-Sensor can work for global American, Asian, and European vehicles.

100% ID Clonable: Autel sensors can quickly copy the original sensor ID and be programmed. Max Signal Strength: Up to 20 MX-Sensors can be programmed at once within 5-7 seconds. Lasting Battery Life: Autel MX-Sensor lasts 6-year battery life and other. Work with Autel TPMS Tools: Autel MX-Sensors can be easily activated /programmed /relearned by Autel TS408, TS508, TS601, TS608, ITS600, MK808TS, MP808TS, MS906TS, MS906PRO TS, etc. Autel TPMS Sensor with 2-in-1 315 & 433MHz Frequency, Serve 99% of Vehicles.

Autel MX-Sensor combines dual 315&433MHz frequency in one SKU and covers 99% of vehicles. With the same functions of OE sensors and more reasonable bucks as other brands, this Autel MX-Sensor is designed for DIYers and tire repair shops to lower business costs and higher installation efficiency. 2-in-1 Frequency: Autel MX-Sensor comes with dual frequency (315MHz & 433MHz) and is able to replace almost 99% of OEM/Universal sensors. 99% of Vehicle Coverage: Autel 2-in-1 TPMS sensors serve 99% of tire types & vehicles on the road, reducing the investment & inventory of OEM TPMS sensors for repair shops. Unlimited Programming: All the Autel MX-Sensors can be activated/programmed/relearned with Autel TPMS tools TS408/TS508/TS601/ITS600/MK808TS/MP808TS/etc.

Wireless Programming: Up to 20 MX-Sensors can be programmed at once within 5-7 seconds. Press-in Valve Stem: A slight press can easily install and disassemble the MX-Sensor from the wheel.

Interchangeable Valve Design: The interchangeable rubber & metal valve stems can be replaced in the same sensor head by hand without a tool. New Chip: Newest Freescale Fxth870911 chip offers stable sensor data transmission.

Durable Quality: SAE J1205/J1206 standard certified, Autel MX-Sensors can work well in the extreme temperature range from -40°C to 125°C. 6-Year Battery Life: Reliable sensor battery lasts 6 years power consumption. Given the massive need for sensor replacement and the cost, Autel MX-Sensors with 2-in-1 frequency (315MHz & 433MHz) last a 4-6 year lifespan and serves global 99% of vehicles.

Adjustable valve stem (range of 15-30°) will perfectly fit all types of rims, with no air leaking. America: Ford, Lincoln, Chrysler, Dodge, Jeep, GM, Cadillac, Chevrolet, Buick, GMC, etc. Asia: Acura, Lexus, Suzuki, Subaru, Mitsubishi, Mazda, Kia, Isuzu, Infiniti, Hyundai, Honda, Daihatsu, Daewoo, etc.

Europe: VW, Seat, Skoda, Peugeot, Citroen, Renault, Volvo, Vauxhall, Smart, Saab, Rolls-Royce, Porsche, Mini, BMW, Jaguar, Fiat, Ferrari, Dacia, Citroen, Bugatti, Benz, Bentley, Audi, etc. Programmable Autel MX-Sensors, 100% Cloneable. Maximum Signal Strength: Powerful signal strength allows 16-20 sensors to be programmed at once within 5-7 seconds.

100% Cloneable: Autel MX-Sensor is 100% clone-able. No relearn procedure is required when the MX-Sensor is cloned with the original sensor ID and put in the same position.

Wireless Programming: Even if these Autel sensors are mounted on tires they can be programmed wirelessly. Easy-to-Use & Easy-to-Install Autel TPMS Sensor. The press-in valve design makes it easier to install/dismantle Autel MS-Sensor.

The sensor head and the valve can be connected together with a gentle press. The interchangeable rubber & metal valve stems even can be replaced in the same sensor head by hand without a tool. 5 Steps for Easy Installation. Loosen The Tire: Remove the valve cap and core and deflate the tire. Demount The Tire: Clamp the tire onto the tire changer, and adjust it to the right position to dismount the bead.

Dismount The Original Sensor: Remove its cap, screw nut, and washer from the valve stem, and then remove the sensor assembly from the rim. Assemble The New Autel MX-Sensors to The Wheel. Mount The Tire Bead into The Wheel. 0.1(Bar) Pressure Precision. Configured with the 2023 new chip - Freescale Fxth870911 Chip, Autel MX-Sensor can monitor the tire pressure, read the pressure from 0 to 800 kPa with 0.1(Bar) precision, and provide real-time alerts to the driver.

Same functionality as OE sensors, Autel MX-Sensor is a cost-effective alternative to OEM sensors and powers a 6-year battery lifespan. You don't need to replace the sensor without serious impact or breakage. 40°C to 125°C Working Temperature. Autel tire pressure sensor is designed to work in -40°C to 125°C temperature conditions. Within its working temperature, Autel MX-Sensors function correctly and provide accurate tire pressure readings.

Autel Handheld TPMS Tool Family. TS508: Sensor Activation; 4 Options for Autel Sensor Programming; 3 Ways for Sensor Relearn, etc. TS508 WF: Sensor Activation; 4 Options for Autel Sensor Programming; 3 Ways for Sensor Relearn, etc. TS601: Sensor Activation; 4 Options for Autel Sensor Programming; 3 Ways for Sensor Relearn; TPMS Diagnostics, etc. TS608: Sensor Activation; 4 Options for Autel Sensor Programming; 3 Ways for Sensor Relearn; Bi-directional Control; TPMS Diagnostics; All System Diagnostics; 32+ Reset Functions; Work with BT506/MV105, etc.

ITS600: Sensor Activation; 4 Options for Autel Sensor Programming; 3 Ways for Sensor Relearn; 4 Reset Functions; Key Fob Test; Work with BT506, etc. Autel Comprehensive TPMS Diagnostic Tool. MK808S-TS/MP808S-TS:Sensor Activation; 4 Options for Autel Sensor Programming; 3 Ways for Sensor Relearn; 30+ Reset Functions; All System Diagnostics; Bi-directional Control; ECU Coding, etc. MS906TS/MK906PRO-TS/MS906PRO-TS: Sensor Activation; 4 Options for Autel Sensor Programming; 3 Ways for Sensor Relearn; ECU Coding; 36+ Reset Functions; All System Diagnostics; Bi-directional Control; etc.

Programmable Universal Autel TPMS MX-Sensor New Generation 100% ID Clone-able with No Relearn Required (Metal & Rubber Screw-in Valve). Autel MX-Sensor combines both 315MHz+433MHz frequencies into one TPMS sensor with the highest industry vehicle coverage. The exclusive MX-Sensor patented screw release valve stem design, allows rubber/metal valve stems to flex the angle(normally use the maximum angle of 30°), without requiring a tool for sensor head fitting. Built to match or exceed OEM sensors in frequency strength and durability, MX-Sensors are 100% ID clone-able with no relearn required and offer latest model vehicle coverage because they quickly update with an Autel wireless programming tool. 1.98% COVERAGE: Featuring the latest and most comprehensive coverage of 98% OE sensors on the market, and up to 90% of North American, European and Asian vehicles, it nearly fits all types of wheels on the road. On the shop level, needing only 1-Sensor to service nearly every TPMS equipped vehicle means lower repair cost and higher install efficiency. 2.2 IN 1 FEATURE: Only 1 Sensor to service nearly every TPMS equipped vehicle to lower repair cost and to have higher install efficiency with no relearn required. The MX-Sensor is 100% cloneable with the original sensor ID and put in the same position.

EASY TO USE: The maximum sensor signal strength allows sensors to be easily programmed wirelessly even when they have already been mounted to the wheel. Moreover, the unique PRESS release valve design makes the manual sensor replacement much easier. SOLID & DURABLE: Equipped with an automotive grade battery, a replaceable metal/rubber valve stem to withstand cold, hot and resistance corrosion, and a high-precision air valve to prevent air leakage, this sensor ensures superior stability and performance. Service: MX-Sensor is free from material and manufacturing defects for a period of 24months or for 24,000miles.

Each sensor is marked with a series number to track the sensor quality from the factory to ensure that only the highest quality parts are installed. MAXIMUM SIGNAL STRENGTH WIRELESS PROGRAMMING:The extraordinary sensor signal strength allows AUTEL 1-Sensor to be easily programmed wirelessly even when the sensors have already been mounted to the wheel. And with strong signal strength, now up to 16 sensors can be programmed in one session with AUTEL latest TPMS tools.

AUTEL MX-Sensor is 100% clone-able. No relearn is required when the MX-Sensor is cloned with the original sensor ID and put in the same position. The rubber and metal valve stems are interchangeable. Autel MX-Sensor - Dual Frequency 315MHz+433MHz Programmable TPMS Sensor.

2 in 1 TPMS Sensor: Combining 2 frequencies (315MHz & 433MHz) into Autel MX-Sensors. The common sensors on the market have only one frequency. Metal & Rubber Valves: Exclusive press release valve provides the interchangeable rubber & metal valve stems for easy removal and replacement by hand without a tool. 100% ID Clone-able: Autel MX-Sensors can 100% copy the original sensor ID and replace the original one in the same position without relearning procedure when programmed. Programmable Sensors: All the Autel MX-Sensors can be activated/programmed/relearned with Autel TPMS tools TS408/TS508/TS601/ITS600/MK808TS/MS906Pro-ts/etc.

Performing the same functionality as the OEM sensors but more cost-effective. Wireless Programming: Thanks to the powerful signal strength, up to 20 MX-Sensors can be wirelessly programmed simultaneously even already mounted to the wheel. 99% Vehicle Coverage: Universal Autel sensors cover 98% of vehicle models.

No more need to stock a large number of sensors for various vehicles. Quality Control: Tested & certified to meet SAE J1205/J1206 standards. Each sensor owns a series number for quality control and takes no charge from manufacturing defects for a period of 24 months or 24,000 miles. Given the massive need for sensor replacement and the cost, Autel MX-Sensors with 2-in-1 frequency (315MHz & 433MHz) serves global 99% of vehicles. America: for Ford, Lincoln, Chrysler, Dodge, Jeep, GM, Cadillac, Chevrolet, Buick, GMC, etc.

Asia: for Acura, Lexus, Suzuki, Subaru, Mitsubishi, Mazda, Kia, Isuzu, Infiniti, Hyundai, Honda, Daihatsu, Daewoo, etc. Europe: for VW, Seat, Skoda, Peugeot, Citroen, Renault, Volvo, Vauxhall, Smart, Saab, Rolls-Royce, Porsche, Mini, BMW, Jaguar, Fiat, Ferrari, Dacia, Citroen, Bugatti, Benz, Bentley, Audi, etc. Autel MX-Sensor Press-in Valve Design. When the programmed Autel MX-Sensors work well with the TPMS system, it brings great benefits to you.

Monitor whether the tires are properly inflated or not on the vehicle's dashboard. Optimize the tire's traction. Slow the wear of the tread area.

Notify the drivers with a flat tire warning light timely to avoid possible danger. Facilitate all users to replace TPMS sensor timely and reduce extra cost for your car. Screw-in & Adjustable Angel & Metal Valve.

Screw-in: The screw-in design ensures the sensor body and valve stem are firmly connected, making the sensor replacement easy and fast. 15-30°Adjustable Angle: A better fit for a wider variety of vehicles; can be adjusted at any angle within the range of 15-30°. Aluminum valve: Built with aluminum valve stems, the Autel tire pressure monitor sensor can be used in all types of hazardous weather conditions and harsh environments.

EXCLUSIVE PRESS RELEASE INTERCHANGEABLE VALVE STEMS. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Installing TPMS sensors has never been so easy.

An easy to use and cost effective necessity for any shop performing TPMS repairs, the Autel 1-SKU sensor inventory solution with 98% vehicle coverage eliminates the need for distributors to carry the hundreds of sensors to fulfill shop orders. We accept online Pay or Pay/Pal.

This will help your product to be received safely and quickly! And we are not responsible for order's delay or miss because of your incomplete contact information. Please return the item within 30 days after receiving if you are not happy with your purchasing. We have been engaged for many years in the line of automobile diagnosing instruments and our corporation is established for the purpose of trustworthiness. We have office in Shenzhen, China and 5 warehouses that are located in HongKong, USA, UK, CA, AU etc.

Customer Service Hours: M-F: 9:30AM - 18:00PM BST (Beijing Standard Time).